Your Creative Partner Since 1970 

Pocketwizard FlexTT5 Transceiver for Panasonic 433MHz

45.1.PW-FLEX-P-CE

Product Features:

Combination Transmitter & Receiver
High Speed Sync up to 1/8000th Sec
32 Channels, Multi-Zone
On-Camera Hot Shoe
Triggers Flash or Camera
Triggers All Pocket Wizards
Standard Triggering with Most Cameras
USB Upgradeable
$310.00
Stock Level:
In Stock
Check Location Availability

Pocketwizard FlexTT5 Transceiver for Panasonic 433MHz

Essential Add-On's we recommend

Description

FlexTT5-Panasonic

Use the FlexTT5 Transceiver to control single or multiple off-camera Lumix Speedlites.

You can now place TTL or manual flashes anywhere to illuminate the scene: Around corners, out-of-sight and in bright sunlight. The FlexTT5 is compatible with any PocketWizard radio for triggering manual flash or remote cameras.

 

Manual Power Control
Remotely adjust the manual power settings of your flashes in up to three zones (groups). You can have as many flashes in each group as you want.

HSS
Get more light, faster recycling times and more shots per battery with Panasonic’s High Speed Sync (HSS) mode, optimized by PocketWizard’s ControlTL technology. Now you can take advantage of this great feature and shoot wide open in full sun with remote speedlights.

HyperSync®
HyperSync allows photographers to achieve faster X-sync speeds with full power flash. Now you can cut the ambient light and use wide-open apertures outdoors in bright sunlight. That extra speed can also freeze action, whether shooting models or athletes in motion.
*Every camera/flash system performance will be different.

PocketWizard Compatible
Works with all PocketWizard radios on the same frequency including PocketWizard OEM Partner products like Sekonic meters and Profoto, Bowens, Calumet, Dynalite, Lumedyne, Norman and Photogenic flash packs for standard triggering and HyperSync.

PocketWizard Utility
Using a standard USB connection and the free PocketWizard Utility, you can easily configure your channel settings, dial in your HyperSync timing, adjust your sleep-mode timers and update your product to the latest firmware virtually making FlexTT5 radios “Future Proof”.

Auto-Sensing Transceiver Technology
PocketWizard’s Auto-Sensing Transceiver Technology enables the FlexTT5 Transceiver to switch between transmit mode and receive mode automatically for greater flexibility on the job.

Auto-Relay Mode
Easily trigger a remote camera in sync with a remote flash with Auto-Relay Mode. Put a camera where you can’t be and use either remote TTL or non-TTL lighting or both at the same time.

ZoneControl
Use your Panasonic camera’s flash menus to control the power of up to 3 Groups (zones) of light.

Camera/Flash Ports
The FlexTT5 Transceiver has two plug-in ports for use with remote cameras and other flash packs. With its Auto-Relay Mode, the FlexTT5 can trigger a remote camera and transmit to a remote flash at the same time. 

 

TTL Compatibility:

Panasonic TTL compatible - Visit wiki.pocketwizard.com for updated compatibility list

Frequency:

340.00 - 354.00 MHz US FCC / IC
433.42 - 434.42 MHz CE

Channels:

52 Channels over 26 Frequencies (FCC/IC)
35 Channels over 5 Frequencies (CE)

Antenna:

2.7" (6.9 cm) rubberized with 180 degree swing

Transmit output power:

Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)

Range Performance:

Comparable to other PocketWizard radios (Actual range is dependent on multiple factors including equipment, mode, environment, positioning,
orientation and interference)

 

Mounting:

Hot Shoe, 1/4-20, lanyard, velcro

Maximum Shooting Rate  Frames per second (fps)

TTL Mode:  within 1 FPS of camera's maximum FPS
* dependent on flash power settings  
FPS = Frames Per Second

Power / Channel Switch

OFF - C.2 - C.1

Zone Select Switch

A-B-C (matches Panasonic Groups/Zones)

Status Indicator

LED: Green, Amber, Red status indications

Camera / P1 Port

1/8" (3.5 mm) stereo miniphone for 2-stage remote camera triggering.  Port Voltage Handling: up to 50 Volts, 100 milliamp continuous
Tip = Trigger
Ring = Pre-Trigger
Sleeve = Ground
Note: for camera triggering only.  Do not connect a flash to this port.

Flash / P2 Port

1/8" (3.5 mm) mono miniphone.  Port Voltage Handling: up to 200 Volts, 4 amps peak, 250 milliamp continuous, non-polarized

Minimum Receive Contact Time

Camera / P1 Port = 80 milliseconds

 Flash / P2 Port = 500 milliseconds

Voltage Present

3.3 VDC (all pins) - safe for all cameras

Hot Shoe voltage protection:

Hot Shoe: up to 50 Volts

USB:

USB Compliant 2.0, Mini-B Connector, 5VDC regulated, 100mA, Pin 1 Positive, Pin 4 Ground

Operating Temperature

Above -15° C (5° F) and below 50° C (120° F).

Storage Temperature (without battery)

Above -30 C (-22 F) and below 85 C (185 F)

Construction

High impact plastic, captive battery door
Hot Shoe made of glass reinforced resin

Power

Two (2) AA (IEC:LR6) Alkaline recommended, other chemistries (NiMH, NiCAD, Lithium) allowed, USB

Battery Life

30 + Hours 

Dimensions

3.6" (9.2 cm) long x 2.9" (7.3 cm) wide x 1.4" (3.6 cm) tall, antenna lowered

Weight

5.4 oz (153 grams) 3.8 oz (108 grams) without batteries

Included in the box

FlexTT5 Transceiver, USB cable, Two (2) AA batteries

ROHS Compliant

 

You may also like...