Description

D-Box (Canon C700, V-Mount) is a custom version of our popular D-Box that adds power distribution, standardised remote start/stop, and hot swap capability to the Canon C700. The D-Box attaches directly to the back of the camera body using a special Molex connector eliminating external cabling. It also interfaces with the rear LANC port which is how the D-Box controls the camera's run/stop.

Connectors on the D-Box are contoured inline with the Canon C700 body, streamlining port connections and cable management. The module also provides two 3pin Fischer ports, allowing start/stop with any ARRI standard trigger device.

The D-Box is equipped with a RED 6pin LEMO compatible DC Input allowing an AC Power Supply or External Power Plate to be connected to power the camera and accessories during a battery change. When both battery and DC input are utilised, the D-Box defaults to the DC input, leaving the battery fully charged.

Overview:
Authentic IDX V-Mount plate provides 2x D-Tap (unregulated) on the power plate itself but we should note that one D-Tap may be obscured by the right side 2pin connectors when in use. The camera receives an unfused connection to the power source and the D-Box connectors share a 7.5A fuse. When using D-Box battery modules it is important to know what amount of power your batteries are capable of providing. Most high-end cinema batteries can supply up to 10A with the C700 camera generally consuming 3-4A in standard configuration. Although the remaining power is available from the D-Taps, LEMO compatible connectors, Fischers, etc., it is best to limit the power draw to 5A or less for best results. Consuming more power than a battery is capable of providing will cause the battery to shut itself off, killing the camera and accessory power.

D-Box Connections:

1. D-Tap - 12V Unregulated

2. USB - 5V Regulated

3. 2 pin LEMO compatible connector - 12V Unregulated

- ARRI standard wiring

4. 2 pin LEMO compatible connector - 12V Unregulated

- ARRI standard wiring

5. 3 pin Fischer - 24V Regulated

- Regulator built in to convert battery voltage to 24V

- Maximum 2A continuous (3A surge) shared between the two 3pin Fischers

- ARRI standard start/stop capabilities

6. 3 pin Fischer - 24V Regulated

- Regulator built in to convert battery voltage to 24V

- Maximum 2A continuous (3A surge) shared between the two 3pin Fischers

- ARRI standard start/stop capabilities

7. DC Input - 12-16V

- RED 6pin LEMO compatible DC

- Priority is given to DC Input to preserve battery charge when both sources connected

Connectors used in this assembly are not manufactured by LEMO but are made to the same specifications and are LEMO compatible.